Related Topics
The Band-Stop Filter attenuates a band of frequencies centered around a set frequency.
|
Control |
Function |
Default / Range |
|---|---|---|
|
Response Panel |
The Response panel provides vertical and horizontal cross-hairs with a dynamic frequency and dB read-out. Place the mouse courser over the graph to activate the cross-hairs. When the Phase control is activated, the horizontal cross-hair line to the left of center represents the normal curve, the right side represents the phase curve. The readout is only for the normal curve. |
X-Axis = 20 Hz to 20 kHz Y-Axis Left = -24 dB to 24 dB Y Axis Right = -180° to -180° |
|
Phase |
Turns the Phase curve on and off. |
On/Off |
|
Bypass |
Bypasses the filter. |
Off/On |
|
Invert |
Inverts the output signal. |
Normal/Inverted |
|
Mute |
Mutes the output signal. |
Off/On |
|
Frequency (Hz) |
Sets the center frequency of the band of frequencies to be attenuated by the filter. |
Default = 1000 Range = 20 to 20000 |
|
Bandwidth (Octave) |
Sets the width of the band of frequencies to be attenuated by the filter. |
Default = 1 Range = 0.010 to 1.00 |
|
Gain (dB) |
Sets the output Gain measured at the center frequency of the stop band. |
Default = 0 Range = -100 to 20 |
|
Property |
Function |
Choices |
|---|---|---|
|
Type |
Sets the type of input and output channels |
Mono Stereo Multi-Channel |
|
Count |
For Multi-Channel, sets the number of channels. |
2 to 256 |
|
Property |
Function |
Choices |
|---|---|---|
|
Enabled |
Determines if the Response Panel is visible in the Control Panel |
Yes / No |
|
Size |
Determines the size of the Response Panel. |
Small Medium Large |
|
Pin Name |
Value |
String |
Position |
Pins Available |
|---|---|---|---|---|
|
Bandwidth |
0.010 to 1.00 |
.010 to 1.00 |
0.000 to 1.00 |
Input / Output |
|
Bypass |
0 1 |
active bypass |
0 1 |
Input / Output |
|
Frequency |
10.0 to 20,000 |
10 Hz to 20 kHz |
0.000 to 1.00 |
Input / Output |
|
Gain |
-100 to 20 |
-100 dB to 20 dB |
0.000 to 1.00 |
Input / Output |
|
Invert |
0 1 |
normal invert |
0 1 |
Input / Output |
|
Mute |
0 1 |
unmute mute |
0 1 |
Input / Output |
© 2009 - 2016 QSC, LLC. All rights reserved. QSC and the QSC logo are trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners.
http://patents.qsc.com.
